Contact us today for the Free Quote
CSM RE8040-SHA RO Membrane
- The stated product performance is based on data taken after 30 minutes of operation at the following test conditions:
- 32,000 mg/L NaCl solution at 800 psi applied pressure
- 8% recovery
- 77 oF (25 oC)
- pH 6.5 –7.0
- Boron rejection is 9 2.0% at pH 8.0 and 5 mg/L boron feed with the same test conditions as above.
- Minimum salt rejection is 99.6%.
- Permeate flow rate for each element may vary but will be no more than 15%.
- All elements are vacuum-sealed in a polyethylene bag containing 1.0% SBS (sodium bisulfite) solution and individually packaged in a cardboard box.
APPLICATION DATA :
Operating Limits:
- Max. Pressure Drop / Element 15 psi (0.1 MPa)
- Max. Pressure Drop / 240” Vessel 60 psi (0.41 Mpa)
- Max. Operating Pressure 1,200 psi (8.27 MPa)
- Max. Feed Flow Rate 75 gpm (17.0 m3/hr)
- Min. Concentrate Flow Rate 16 gpm (3.6 m3/hr)
- Max. Operating Temperature 113 oF (45 oC)
- Operating pH Range 2.0–11.0
- CIP pH Range 1.0–13.0
- Max. Turbidity 1.0 NTU
- Max. SDI (15 min) 5.0
- Max. Chlorine Concentration < 0.1 mg/L
GENERAL HANDLING PROCEDURES:
- Elements contained in the boxes must be kept dry at room temperature (7–32°C; 40 –95°F) and should not be stored in direct sunlight. If the polyethylene bag is damaged, a new preservative solution (sodium bisulfite) must be added and air-tight sealed to prevent drying and biological growth.
- Permeate from the first hour of operation should be discarded to flush out the preservative solution.
- Elements should be immersed in a preservative solution during storage, shipping and system shutdowns to prevent biological growth and freezing. The standard storage solution contains 1% by weight sodium bisulfite or sodium meta bisulfite (food grade). For short term storage (i.e. one week or less) 1% by weight sodium meta bisulfite solution is adequate for preventing biological growth.
- Keep elements moist at all times after initial wetting.
Avoid excessive pressure and ow spikes.
- Only use chemicals compatible with the membrane elements and components. The use of such chemicals may void the element’s limited warranty.
Permeate pressure must always be equal or less than the feed/concentrate pressure. Damage caused by permeating back pressure voids the element limited warranty.
Compatible Systems
- Seawater reverse osmosis plants
- Industrial desalination systems
- Commercial RO treatment systems
- High-pressure RO applications
- Water purification systems
- Process water treatment systems
- Large-scale desalination projects
How It Works
- The water purifier uses a multi-stage filtration process with RO membrane technology to reduce dissolved impurities and unwanted substances from incoming water.
- The RO filtration system uses a dense membrane layer to separate impurities while producing purified drinking water.
- The purified water is stored inside the internal tank and supplied through the dispenser with cold or ambient water selection.
Modal
Features
Standard Features
- Spiral-wound thin film composite polyamide membrane technology
- Designed for high-pressure seawater RO applications
- 8 x 40 membrane element configuration
- High salt rejection capability for desalination processes
- Suitable for demanding feedwater conditions
- Designed for controlled operating pressure and flow conditions
- Compatible with industrial RO system configurations
Available Options
- Replacement membrane supply for existing RO plants
- Membrane selection based on feedwater analysis
- Technical assistance for membrane compatibility
- Supply support for different desalination system capacities
Availability in UAE
Ultratec Water Treatment Equipment LLC supplies RO membranes in Dubai, UAE for industrial desalination and water treatment applications. Our technical team can assist with membrane selection based on feedwater conditions, operating parameters, and system requirements.
Frequently Asked Questions
The CSM RE8040-SHA membrane is designed for high-pressure reverse osmosis applications, including seawater desalination and industrial water treatment systems.
RO membranes should be stored according to manufacturer guidelines, keeping elements protected from drying, extreme temperatures, and unsuitable storage conditions.
Get In Touch
Contact our team in Dubai to discuss your water treatment requirement and receive a solution configured for your site.
Related RO Membrane Brands
Explore other reverse osmosis membrane brands available from Ultratec for commercial and industrial water treatment systems.
