Skip to main content

Ultratec Water Treatment LLC

What Is a Dosing Pump and How Does It Work?

A chemical dosing pump, also known as a metering pump, supplies precise, small quantities of liquid into water tanks or pipelines. You control the discharge quantity with each pump stroke. Pumps usually use suction lines to draw chemicals from the tanks before they move it through the injection fitting to the main pipe. The chemical dosing system expands beyond the pump and includes a dosing tank, tubing, injection point, foot valve too. An automatic chemical dosing system uses signal input from pH and ORP and flow sensors in addition to the pump to control its own rate of operation.

Types of Dosing Pumps

TypeHow It WorksBest ForLimitation
DiaphragmA flexible diaphragm moves back and forth to push the chemicalMost water treatment plants, acids and chlorineDiaphragm needs replacing over time
SolenoidAn electromagnet drives the stroke, in pulsesSmall flows, pools, pH and chlorine controlLimited pressure and flow
PeristalticA roller squeezes a tube to move the liquidThick liquids, sodium hypochlorite, food-grade usesTube wears and needs changing
PistonA piston moves the liquid directlyHigh pressure and large flowsHigher cost and more maintenance

Where Dosing Pumps Are Used

ApplicationWhat Is DosedPurpose
RO plantsAntiscalantStops scale on membranes
Drinking waterChlorineDisinfection
Water treatmentAcid or alkalipH adjustment
Cooling towersBiocide, corrosion inhibitorStops bacteria and rust
BoilersOxygen scavenger, scale inhibitorProtects the boiler
Swimming poolsChlorine, acidKeeps water safe and balanced
WastewaterCoagulant, polymerHelps solids settle

What Dosing Pump Does UltraTec Water Treatment LLC Supply?

Dosing Pumps

How to Choose the Right Dosing Pump

Start with what you are dosing, then work through the checklist below.

What to CheckWhy It Matters
Chemical typeAcids, chlorine and antiscalants need different pump materials
Flow rate (L/h)A pump that is too big dosing unevenly, one that is too small can’t keep up
Line pressureThe pump must work against the pressure at the injection point
Control methodManual dial, digital or sensor-controlled
Tank sizeDecides how often you refill
Power supplyMatch your site voltage
Wetted MaterialHandles Well
PVCAntiscalant, mild acids, coagulants
PVDFAcids, sodium hypochlorite, chlorine
PTFEStrong acids and aggressive chemicals
Stainless steelHeads and fittings on solvent or high-pressure uses

Common Mistakes to Avoid

  • Picking a pump only by price and ignoring the chemical
  • Sizing for peak demand and leaving the pump to run at 5% of its range
  • Skipping a foot valve filter, so dirt blocks the suction line
  • Forgetting to check the injection fitting after a few months

Final Thoughts

Leave a Reply

Your email address will not be published. Required fields are marked *